This product is a high gloss floor finish designed for use in electronic production areas, computer rooms and other static sensitive areas. Contains a non-migratory, static dissipative polymer, which will maintain a constant surface resistivity of 10⁶-10⁸ ohms throughout the humidity spectrum.

Features & Benefits

• Resistivity between 10⁶-10⁸
• High gloss polymer
• Slip resistant
• Effective in low humidity
• Zinc free

How to Use

With a new mop and clean pails, apply coating as follows:

1. Apply thin coat to floor, i.e. ¾ way down on the ringer. Let dry to touch, approximately 45 – 60 minutes. 
2. Apply a second coat, approximately ½ way down on the ringer. 
   Note: Two coats only are recommended for conductive tile. 
3. If a third coat is applied, wait 24-hour waiting period/dry time after previous coat. 

If a third coat is applied, the floor space may be occupied once it is dry. After at least a 6-hour wait, buff the floor with a white pad to harden and polish the coating. Expect a coating yield of 1,200 ft² for each gallon of coating per coat.